Fencerite Industries designs, manufactures and installs fences and gates for residential and commercial clients across New Zealand. Pipe and mesh fencing systems designed and installed by Fencerite are of different types that include intermediate posts, corner and end posts, stays, rails, line wires, mesh, barbed wire and extensions. All these fences are designed with straight line finishing and come with robust construction.
Intermediate posts are made with ostensible bore galvanised pipe of 40mm and are concreted with 600mm depth. Centres of these posts are made with 3 meter and are plumbed vertically. Their corner and end posts are designed to have 50mm standard measurement. Stays can be installed at all corners and ends, and each of them has a measurement of 32mm made of nominal bore galvanised pipe. These stays can be wired facing the strain. Their rails need to be designed in straight lines, and fittings need to be tightened thoroughly. The bottom part of rail needs to be cut to 50mm heading the ground level.
Extensions of the pipe and mesh fences can be made either as straight or as bent models, with a bent angle of 45 degree vertical end. The top of the mesh can be extended up to 450mm.